TheRonda S360 KNX UP WH_0005_o893v17_theRonda_theMova

TheRonda S360 KNX UP WH

KNX Passive infrared presence detector for ceiling installation
Circular detection area 360°, up to Ø 8 m (50 m²) at 3 m installation height
Automatic presence- and brightness-dependent control for lighting and HVAC
Mixed light measurement suitable for fluorescent (FL/PL/ESL), halogen/incandescent lamps and LEDs
2 light channels C1, C2
Switching operation or constant light control with standby function (orientation light)
Switching mode with dimmable lighting
Choice of fully or semi-automatic
Brightness switching value or set point value can be set in lux by using parameters, the object, or via remote control
Teach-in of the brightness switching value or the set point value

Reduction of time delay when present briefly (short-term presence)
Manual override by telegram or remote control
2 presence channels C4, C5, individually configurable
Switch-on delay and time delay configurable
Setting the room correction factor for brightness measurement comparison
Adjustable sensitivity
Test mode for checking function and detection area
Scenes
Parallel switching of multiple presence detectors (Master/Slave or Master/Master)
Ceiling installation in flush-mounted socket
Ceiling installation also possible with a surface-mounted frame
User remote control «the Senda S» (option)
Management remote control «the Senda B» (option)
Installation remote control «the Senda P» (option)

SKU: 2089520 Categories: KNX, Presence and motion detectors Brand: theben

Description

Technical data

Installation height	2 – 4 m
Minimum height	1.7 m
Measuring range brightness	10 – 3000 lx
Detection angle	360°
Type of connection	KNX bus terminal
Installation type	Ceiling installation
Light switch-off delay	30 s – 60 min
Light measurement	Mixed light measurement
Presence switch-off delay	10 s – 120 min
Switch-on delay presence	10 s – 30 min / inactive
Ambient temperature	-15°C … 50°C
Detection range	50 m² (ø 8 m \| 360°)
Colour	White
Type of protection	IP 54 (when fitted)

https://www.theben.de/ocsmedia/optimized/full/o39233v78_theRonda_S360_KNX_UP_WH_Data_sheet.pdf

RECENT VIEWER

Chopin – fer forgé rosé

Chopin, meet the maestro. Controlling Chopin feels a bit like playing the piano. Push the levers up or down to intuitively dim the lights, close the curtains and let your favourite music enter the room. Press and hold the levers for even more functions. An internal temperature sensor discretely reports the room temperature. The integrated thermostat function does the rest. Combine Chopin with our sockets in a horizontal or vertical 2-gang configuration. Opt for 1 or 2 levers in 3 different finishes: black aluminium, chromed or gold plated, creating a sophisticated and timeless appearance.

Quick view

thePrema S360 KNX UP BK

Passive infra-red presence detector KNX for flush-mounted ceiling installation
Square detection area 360°, 7 x 7 m, (49 m²) at mounting height 3 m
2 channels light and 2 channels presence
2 channel light C1, C2 with 1 light measurement
2 presence channels C4, C5 can be set individually
Adaptable 1 channel light measurement
Mixed light measurement suitable for LEDs, fluorescent lamps (FL/PL/ESL) and halogen/incandescent lamps
Can be used as fully or semi-automatic, switchable
Switch or constant light control mode with stand-by function
Dimmable lighting in switch mode with stand-by function

Brightness switching value or set point value can be set in lux using parameters, on the device itself or via remote control
Teaching in of the brightness switching value or the set point value
Room correction factor setting for brightness measurement calibration
Light time delay can be set using parameters, on the device itself or via remote control
Switch on delay and time delay for presence can be set
Detection sensitivity can be set
Self-learning time delay
Reduced time delay in the event of a shorter stay in the room (short presence)
Scenario functions
Extremely easy setting of energy saving characteristics with the new "eco plus" function
Test mode for checking function and detection range
Parallel switching of several detectors in Master/Slave or Master/Master possible
User remote control and management-remote control (optional)
Room monitoring
* According to warranty terms and conditions, see www.theben.de/en/guarantee

Quick view

theRonda P360 KNX UP WH

Passive infra-red presence detector KNX for flush-mounted ceiling installation
Circular detection area 360°,Ø 24 m, (452 m²) at mounting height 3 m
2 channels light and 2 channels presence
2 channel light C1, C2 with 1 light measurement
2 presence channels can be parametrized individually
Adaptable 1 channel light measurement
Mixed light measurement suitable for LEDs, fluorescent lamps (FL/PL/ESL) and halogen/incandescent lamps
Can be used as fully or semi-automatic, switchable
Switch or constant light control mode with stand-by function
Dimmable lighting in switch mode with stand-by function

Brightness switching value or set point value can be set in lux using parameters, on the device itself or via remote control
Teaching in of the brightness switching value or the set point value
Room correction factor setting for brightness measurement calibration
Light time delay can be set using parameters, on the device itself or via remote control
Switch on delay and time delay for presence can be set
Detection sensitivity can be set
Reduced time delay in the event of a shorter stay in the room (short presence)
Scenario functions
Test mode for checking function and detection range
Sensitivity adjustable
Detection area can be limited using cover clip
Manual override using telegram or remote control
Parallel switching of several detectors in Master/Slave or Master/Master possible
Ceiling installation in flush-mounted socket
Ceiling installation also possible with surface-mounted frame
User remote control and management-remote control (optional)

Quick view

thePrema P360 KNX UP BK

Passive infra-red presence detector KNX for flush-mounted ceiling installation
- Square detection area 360°, 9 x 9 m, (81 m²) at mounting height 3 m
- 3 channels of light and 2 channels of presence
- 2 channel light C1, C2 with 2 light measurements and additional lighting channel C3 without brightness factor
- 2 presence channels can be set individually
- Adaptable 3-channel light measurement
- Mixed light measurement suitable for LEDs, fluorescent lamps (FL/PL/ESL) and halogen/incandescent lamps
- Can be used as a fully or semi-automatic, switchable
- Switch or constant light control mode with a stand-by function
- Dimmable lighting in switch mode with a stand-by function

Quick view

theRonda S360 KNX AP BK

- Passive infra-red presence detector KNX for ceiling installation
- Circular detection area 360°,Ø 8 m, (50 m²) at mounting height 3 m
- 2 channels light and 2 channels presence
- Mixed light measurement
- 2 light channels C1, C2
- Switching operation or constant light control with standby function (orientation light)
- Switching mode with dimmable lighting
- Choice of fully or semi-automatic
- Brightness switching value or set point value can be set in lux by using parameters, the object or via remote control
- Teach-in of the brightness switching value or the set point value
- Reduction of time delay when present briefly (short-term presence)
- Manual override by telegram or remote control
- 2 presence channels C4, C5, individually configurable
- Switch-on delay and time delay configurable
- Setting the room correction factor for brightness measurement comparison
- Adjustable sensitivity
- Test mode for checking function and detection area
- Scenes
- Parallel switching of multiple presence detectors (Master/Slave or Master/Master)
- User remote control «theSenda S» (option)
- Management remote control «SendoPro 868-A» (option)
- Installation remote control «theSenda P» (option)

Quick view

thePassa P360 KNX UP WH

Passive infra-red presence detector KNX for flush-mounted ceiling installation
Rectangular detection area 360°, 30 x 4,5 m, (135 m²) at mounting height 3 m, for corridors and storage areas, with 2 individually connectable and disconnectable detection zones
2 channels of light and 2 channels of presence
2 channel light C1, C2 with 2 light measurements
2 presence channels can be parametrized individually
Adaptable 2 channel light measurement
Function aura effect, switches on the lighting group when there is a person in its detection area and dims the adjacent lighting groups
Function chaser light, recognises the direction of movement of the people in the room and "predictively" switches on the adjacent lighting group
Function walking direction recognition
Mixed light measurement suitable for LEDs, fluorescent lamps (FL/PL/ESL) and halogen/incandescent lamps

Can be used as fully or semi-automatic, switchable
Switch or constant light control mode with stand-by function
Dimmable lighting in switch mode with stand-by function
Brightness switching value or set point value can be set in lux using parameters, on the device itself or via remote control
Teaching in of the brightness switching value or the set point value
Room correction factor setting for brightness measurement calibration
Light time delay can be set using parameters, on the device itself or via remote control
Switch on delay and time delay for presence can be set
Detection sensitivity can be set
Reduced time delay in the event of a shorter stay in the room (short presence)
Scenario functions
Test mode for checking function and detection range
Sensitivity adjustable
The detection area can be limited using a cover clip
Manual override using telegram or remote control
Parallel switching of several detectors in Master/Slave or Master/Master possible
Ceiling installation in flush-mounted socket
Ceiling installation also possible with a surface-mounted frame
User remote control and management remote control (optional)

Quick view

thePrema P360 KNX UP WH

Passive infra-red presence detector KNX for flush-mounted ceiling installation
Square detection area 360°, 9 x 9 m, (81 m²) at mounting height 3 m
3 channels light and 2 channels presence
2 channel light C1, C2 with 2 light measurements and additional lighting channel C3 without brightness factor
2 presence channels can be set individually
Adaptable 3 channel light measurement
Mixed light measurement suitable for LEDs, fluorescent lamps (FL/PL/ESL) and halogen/incandescent lamps
Can be used as fully or semi-automatic, switchable
Switch or constant light control mode with stand-by function
Dimmable lighting in switch mode with stand-by function

Brightness switching value or set point value can be set in lux using parameters, on the device itself or via remote control
Teaching in of the brightness switching value or the set point value
Room correction factor setting for brightness measurement calibration
Light time delay can be set using parameters, on the device itself or via remote control
Switch on delay and time delay for presence can be set
Detection sensitivity can be set
Self-learning time delay
Reduced time delay in the event of a shorter stay in the room (short presence)
Scenario functions
Extremely easy setting of energy saving characteristics with the new "eco plus" function
Test mode for checking function and detection range
Parallel switching of several detectors in Master/Slave or Master/Master possible
User remote control and management-remote control (optional)
Room monitoring
* According to warranty terms and conditions, see www.theben.de/en/guarantee

Quick view

thePrema P360 KNX UP GR

Passive infra-red presence detector KNX for flush-mounted ceiling installation
Square detection area 360°, 9 x 9 m, (81 m²) at mounting height 3 m
3 channels light and 2 channels presence
2 channel light C1, C2 with 2 light measurements and additional lighting channel C3 without brightness factor
2 presence channels can be set individually
Adaptable 3 channel light measurement
Mixed light measurement suitable for LEDs, fluorescent lamps (FL/PL/ESL) and halogen/incandescent lamps
Can be used as fully or semi-automatic, switchable
Switch or constant light control mode with stand-by function
Dimmable lighting in switch mode with stand-by function

Brightness switching value or set point value can be set in lux using parameters, on the device itself or via remote control
Teaching in of the brightness switching value or the set point value
Room correction factor setting for brightness measurement calibration
Light time delay can be set using parameters, on the device itself or via remote control
Switch on delay and time delay for presence can be set
Detection sensitivity can be set
Self-learning time delay
Reduced time delay in the event of a shorter stay in the room (short presence)
Scenario functions
Extremely easy setting of energy saving characteristics with the new "eco plus" function
Test mode for checking function and detection range
Parallel switching of several detectors in Master/Slave or Master/Master possible
User remote control and management remote control (optional)
Room monitoring
* According to warranty terms and conditions, see www.theben.de/en/guarantee

Quick view

theRonda S360 KNX AP WH

Passive infra-red presence detector KNX for ceiling installation
Circular detection area 360°,Ø 8 m, (50 m²) at mounting height 3 m
2 channels light and 2 channels presence
Mixed light measurement
2 light channels C1, C2
Switching operation or constant light control with standby function (orientation light)
Switching mode with dimmable lighting
Choice of fully or semi-automatic
Brightness switching value or set point value can be set in lux by using parameters, the object or via remote control
Teach-in of the brightness switching value or the set point value

Reduction of time delay when present briefly (short-term presence)
Manual override by telegram or remote control
2 presence channels C4, C5, individually configurable
Switch-on delay and time delay configurable
Setting the room correction factor for brightness measurement comparison
Adjustable sensitivity
Test mode for checking function and detection area
Scenes
Parallel switching of multiple presence detectors (Master/Slave or Master/Master)
User remote control «theSenda S» (option)
Management remote control «SendoPro 868-A» (option)
Installation remote control «theSenda P» (option)

Quick view

5in1 Ultimate Gaming Kit

د.إ 399.00

Porodo 5in1 Ultimate Gaming Kit Become a pro gamer and skill up your gaming skills whit a gaming combo that includes 5 types of equipment that every gamer should have, enjoy gaming with 5 in 1 full equipment. All you need to become a professional gamer are in this pack. Porodo 5 in 1 Ultimate Gaming Kit comes with rainbow effect keyboard and speaker. There is a 1.5M braided wire microphone plus a mouse and mouse-pad. This gaming kit lets you experience the actual gaming atmosphere.

Features

Membrane Keyboard Switch

Lighting: Rainbow Effects

88dB Sound/Noise Ratio

Omni-Directional Mic

Optimised Mouse-Pad For All Sensitivity Settings

Quick view

Fibonacci – rosé – 4-way

Fibonacci, the new reference. Inspired by Fibonacci’s golden ratio, our keypad brings natural beauty to the heart of your home. Its avant-garde looks elevate even the most sophisticated interiors. The touch-sensitive surface allows effortless operation for an unprecedented user experience. The icons and text labels can be customised to your every need. When approaching Fibonacci, its backlit laser-engraved labels subtly light up to welcome you home.

Quick view

Deseo intelligent thermostat – brushed aluminium

Deseo is a beautiful and intelligent thermostat/room controller with touch-sensitive sensors that allow you to navigate through all the functions in a room (lights, scenes, shades and even the multiroom audio system). Dimensions: 80 mm x 80 mm x 8 mm 3,15 in x 3,15 in x 0,31 in Main features: - room controller and intelligent thermostat - 1.7” oled display - simple & innovative user interface - integrated temperature sensor & thermostat - configurable menu structure - touch-sensitive surfaces - patented multi-touch - integrates with KNX home automation systems Finishes: Deseo is available in four finish ranges to perfectly match any interior: - satin white aluminium, brushed aluminium, brushed volcanic grey, brushed black - bronze, brushed brass, brushed nickel, soft copper - fer forgé: hand textured in a gunmetal, grey, bronze & rosé finish - glass & leather in white & black

Quick view

Username or email address *

Password *

Remember me

Lost password? Recover password

Email address *

Password *

Your personal data will be used to support your experience throughout this website, to manage access to your account, and for other purposes described in our privacy policy.