Line coupler S KNX

Line coupler
For the connection of KNX lines or areas
Galvanic separation of the lines / areas
Long frame support (from ETS 5)
Support of KNX Data Secure communication
Telegrams can be forwarded, filtered or blocked
Can also be used as a line amplifier (repeater)

SKU: 9070880 Categories: KNX, System devices and sets Brand: theben

Description

Technical data

Operating voltage KNX	Bus voltage, ≤10 mA
Operating voltage	24 V DC
Width	2 modules
Installation type	DIN rail
Type of connection	KNX bus terminal
Ambient temperature	-5°C … 45°C
Stock temperature	-25°C … 55°C
Protection class	III
Type of protection	IP 20

Downloads

Hand book	PDF	Linienkoppler S KNX (1,2 MB)
Operating instructions	PDF	Linienkoppler S KNX (1,2 MB)
KNX-Database (Single Product)	ZIP	Linienkoppler S KNX (51,2 kB)
Data sheet	PDF	Line coupler S KNX (191,1 kB)
Brochure	PDF	KNX home and building control brochure (5,9 MB)
Catalogue	PDF	General catalogue 2022 (35,1 MB)

RECENT VIEWER

Sentido – fer forgé bronze – 4-way

Sentido, the light switch reinvented. The entire surface of Sentido is touch-sensitive, creating an innovative and unique user experience. Lights, shades and scenes can be operated at the slightest touch. The unique multitouch function lets you easily dim the room into the right scene. An internal temperature sensor discretely reports the room temperature. The integrated thermostat function does the rest. Sentido’s minimalist look and the use of high-quality materials result in a timeless design.

Quick view

theSenda-S

User remote control
ON/OFF
Automatic
Presence simulation
Twilight switch
Call up of light scenes

Quick view

Miro base

Charge Miro wirelessly with the luxury Miro base, available in 6 premium finishes like brushed aluminium, brushed brass and bronze. Gently put Miro on its base and he will start charging automatically. Miro is capable to charge very fast. Thanks to our low power wireless network, he will last for days. No need to stress, Miro is always there for you!

Quick view

2N® IP VERSO 2.0

Harder. Better. Faster. Stronger. The second generation of the world’s best-selling IP intercom boasts a wide-angle, full-HD camera and a new ARTPEC-7 processor that powers advanced features such as QR code reading. Enjoy unparalleled modularity, superb image quality and a wide variety of access methods. 2N® IP Verso 2.0 awards

Exceptional colour
Unbeatable clarity
Flexible access: including mobile and QR codes

Quick view

2N ACCESS UNIT M

Easy to install and perfect for offices, the 2N Access Unit M features an in-built controller and a single UTP cable is all you need for connection and power. Plus, the access control reader has a slimline design that is great for installation in tricky spots such as door frames. Choose from several versions – RFID, RFID combined with mobile access via Bluetooth, or RFID with a keypad for projects that require two-factor authentication. Show in 3D

Slimline design
Flexible access methods
Controller and reader in one

Quick view

TheRonda S360 KNX UP WH

KNX Passive infrared presence detector for ceiling installation
Circular detection area 360°, up to Ø 8 m (50 m²) at 3 m installation height
Automatic presence- and brightness-dependent control for lighting and HVAC
Mixed light measurement suitable for fluorescent (FL/PL/ESL), halogen/incandescent lamps and LEDs
2 light channels C1, C2
Switching operation or constant light control with standby function (orientation light)
Switching mode with dimmable lighting
Choice of fully or semi-automatic
Brightness switching value or set point value can be set in lux by using parameters, the object, or via remote control
Teach-in of the brightness switching value or the set point value

Reduction of time delay when present briefly (short-term presence)
Manual override by telegram or remote control
2 presence channels C4, C5, individually configurable
Switch-on delay and time delay configurable
Setting the room correction factor for brightness measurement comparison
Adjustable sensitivity
Test mode for checking function and detection area
Scenes
Parallel switching of multiple presence detectors (Master/Slave or Master/Master)
Ceiling installation in flush-mounted socket
Ceiling installation also possible with a surface-mounted frame
User remote control «the Senda S» (option)
Management remote control «the Senda B» (option)
Installation remote control «the Senda P» (option)

Quick view

thePrema S360 KNX UP BK

Passive infra-red presence detector KNX for flush-mounted ceiling installation
Square detection area 360°, 7 x 7 m, (49 m²) at mounting height 3 m
2 channels light and 2 channels presence
2 channel light C1, C2 with 1 light measurement
2 presence channels C4, C5 can be set individually
Adaptable 1 channel light measurement
Mixed light measurement suitable for LEDs, fluorescent lamps (FL/PL/ESL) and halogen/incandescent lamps
Can be used as fully or semi-automatic, switchable
Switch or constant light control mode with stand-by function
Dimmable lighting in switch mode with stand-by function

Brightness switching value or set point value can be set in lux using parameters, on the device itself or via remote control
Teaching in of the brightness switching value or the set point value
Room correction factor setting for brightness measurement calibration
Light time delay can be set using parameters, on the device itself or via remote control
Switch on delay and time delay for presence can be set
Detection sensitivity can be set
Self-learning time delay
Reduced time delay in the event of a shorter stay in the room (short presence)
Scenario functions
Extremely easy setting of energy saving characteristics with the new "eco plus" function
Test mode for checking function and detection range
Parallel switching of several detectors in Master/Slave or Master/Master possible
User remote control and management-remote control (optional)
Room monitoring
* According to warranty terms and conditions, see www.theben.de/en/guarantee

Quick view

theRonda S360 KNX AP BK

- Passive infra-red presence detector KNX for ceiling installation
- Circular detection area 360°,Ø 8 m, (50 m²) at mounting height 3 m
- 2 channels light and 2 channels presence
- Mixed light measurement
- 2 light channels C1, C2
- Switching operation or constant light control with standby function (orientation light)
- Switching mode with dimmable lighting
- Choice of fully or semi-automatic
- Brightness switching value or set point value can be set in lux by using parameters, the object or via remote control
- Teach-in of the brightness switching value or the set point value
- Reduction of time delay when present briefly (short-term presence)
- Manual override by telegram or remote control
- 2 presence channels C4, C5, individually configurable
- Switch-on delay and time delay configurable
- Setting the room correction factor for brightness measurement comparison
- Adjustable sensitivity
- Test mode for checking function and detection area
- Scenes
- Parallel switching of multiple presence detectors (Master/Slave or Master/Master)
- User remote control «theSenda S» (option)
- Management remote control «SendoPro 868-A» (option)
- Installation remote control «theSenda P» (option)

Quick view

US 1 KNX

Surge arrester in the form of a KNX bus terminal
As fine surge protection in KNX or LUXORliving systems

Quick view

Sentido – fer forgé grey – 4-way

Quick view

theRonda S360 KNX AP WH

Passive infra-red presence detector KNX for ceiling installation
Circular detection area 360°,Ø 8 m, (50 m²) at mounting height 3 m
2 channels light and 2 channels presence
Mixed light measurement
2 light channels C1, C2
Switching operation or constant light control with standby function (orientation light)
Switching mode with dimmable lighting
Choice of fully or semi-automatic
Brightness switching value or set point value can be set in lux by using parameters, the object or via remote control
Teach-in of the brightness switching value or the set point value

Reduction of time delay when present briefly (short-term presence)
Manual override by telegram or remote control
2 presence channels C4, C5, individually configurable
Switch-on delay and time delay configurable
Setting the room correction factor for brightness measurement comparison
Adjustable sensitivity
Test mode for checking function and detection area
Scenes
Parallel switching of multiple presence detectors (Master/Slave or Master/Master)
User remote control «theSenda S» (option)
Management remote control «SendoPro 868-A» (option)
Installation remote control «theSenda P» (option)

Quick view

Fibonacci – fer forgé grey – 4-way

Fibonacci, the new reference. Inspired by Fibonacci’s golden ratio, our keypad brings natural beauty to the heart of your home. Its avant-garde looks elevate even the most sophisticated interiors. The touch-sensitive surface allows effortless operation for an unprecedented user experience. The icons and text labels can be customised to your every need. When approaching Fibonacci, its backlit laser-engraved labels subtly light up to welcome you home.

Quick view

Username or email address *

Password *

Remember me

Lost password? Recover password

Email address *

Password *

Your personal data will be used to support your experience throughout this website, to manage access to your account, and for other purposes described in our privacy policy.