Name: thePrema P360 KNX UP WH - Power Hub
SKU: 2079000

thePrema P360 KNX UP WH

POA

Passive infra-red presence detector KNX for flush-mounted ceiling installation
Square detection area 360°, 9 x 9 m, (81 m2) at mounting height 3 m
3 channels light and 2 channels presence
2 channel light C1, C2 with 2 light measurements and additional lighting channel C3 without brightness factor
2 presence channels can be set individually
Adaptable 3 channel light measurement
Mixed light measurement suitable for LEDs, fluorescent lamps (FL/PL/ESL) and halogen/incandescent lamps
Can be used as fully or semi-automatic, switchable
Switch or constant light control mode with stand-by function
Dimmable lighting in switch mode with stand-by function

Brightness switching value or set point value can be set in lux using parameters, on the device itself or via remote control
Teaching in of the brightness switching value or the set point value
Room correction factor setting for brightness measurement calibration
Light time delay can be set using parameters, on the device itself or via remote control
Switch on delay and time delay for presence can be set
Detection sensitivity can be set
Self-learning time delay
Reduced time delay in the event of a shorter stay in the room (short presence)
Scenario functions
Extremely easy setting of energy saving characteristics with the new “eco plus” function
Test mode for checking function and detection range
Parallel switching of several detectors in Master/Slave or Master/Master possible
User remote control and management-remote control (optional)
Room monitoring
* According to warranty terms and conditions, see www.theben.de/en/guarantee

Description

Technical data

Installation height	2 – 10 m
Minimum height	1.7 m
Measuring range brightness	5 – 3000 lx
Detection angle	360°
Type of connection	Spring terminals WAGO 243
Installation type	Ceiling installation
Light switch-off delay	30 s – 60 min
Lamp types	Energy saving lamps, fluorescent lamps, Incandescent/halogen lamps, LEDs
Light measurement	Mixed light measurement
Presence switch-off delay	10 s – 120 min
Switch-on delay presence	10 s – 30 min / inactive
Ambient temperature	0°C … 50°C
Detection range	81 m² (9,0 x 9,0 m)
Colour	White
Type of protection	IP 40 (when fitted)