thePrema P360 KNX AP Multi WH

Multi-sensor KNX
Consisting of passive infra-red presence detector KNX and air quality sensor KNX (= 2 bus participants)
Functions air quality sensor:
Measures CO2 level, relative humidity, temperature and barometric air pressure
Three independent, configurable thresholds for the CO2 level and relative humidity
Integrated individual room thermostat
4 binary inputs
Functions presence detector:
Square detection area 360°, 9 x 9 m, (81 m2) at mounting height 3 m
3 channels light and 2 channels presence

2 channel light C1, C2 with 2 light measurements and additional lighting channel C3 without brightness factor
2 presence channels can be set individually
Adaptable 3 channel light measurement
Mixed light measurement suitable for LEDs, fluorescent lamps (FL/PL/ESL) and halogen/incandescent lamps
Can be used as fully or semi-automatic, switchable
Switch or constant light control mode with stand-by function
Dimmable lighting in switch mode with stand-by function
Brightness switching value or set point value can be set in lux using parameters, on the device itself or via remote control
Teaching in of the brightness switching value or the set point value
Room correction factor setting for brightness measurement calibration
Light time delay can be set using parameters, on the device itself or via remote control
Switch on delay and time delay for presence can be set
Detection sensitivity can be set
Self-learning time delay
Reduced time delay in the event of a shorter stay in the room (short presence)
Scenario functions
Extremely easy setting of energy saving characteristics with the new “eco plus” function
Test mode for checking function and detection range
Parallel switching of several detectors in Master/Slave or Master/Master possible
User remote control and management-remote control (optional)
Room monitoring
* According to warranty terms and conditions, see www.theben.de/en/guarantee

Description

Installation height	2 – 10 m
Minimum height	1.7 m
Measuring range brightness	5 – 3000 lx
Detection angle	360°
Installation type	Ceiling installation
Light switch-off delay	30 s – 60 min
Lamp types	Energy saving lamps, fluorescent lamps, Incandescent/halogen lamps, LEDs
Light measurement	Mixed light measurement
Presence switch-off delay	10 s – 120 min
Switch-on delay presence	10 s – 30 min / inactive
Ambient temperature	5°C … 40°C
Detection range	81 m² (9,0 x 9,0 m)
Colour	White
Measuring range CO₂	300 – 5000 ppm
Setting range temperature	-5°C … 45°C
Measuring range air pressure	30000 – 110000 Pa
Measuring range humidity	1 – 100 % rF
Interface extension max.	30 m
Type of protection	IP 20

Hand book	PDF	AMUN 716 S Set basic KNX (2,8 MB)
Hand book	PDF	thePrema P360 KNX (2,1 MB)
Operating instructions	PDF	Set basic KNX AP Multi WH (4,1 MB)
Operating instructions	PDF	thePrema P360 KNX (1,7 MB)
KNX-Database (Single Product)	ZIP	AMUN 716 S Set basic KNX (255,7 kB)
KNX-Database (Single Product)	ZIP	thePrema P360 KNX (549,0 kB)
Data sheet	PDF	thePrema P360 KNX AP Multi WH (1,1 MB)
Brochure	PDF	KNX home and building control brochure (5,9 MB)
Flyer	PDF	Flyer using light optimally (597,8 kB)
Catalogue	PDF	General catalogue 2022 (35,1 MB)