• 4-way C load switching actuator MIX2
    • With current recognition
    • For higher lamp loads
    • Base module MIX2
    • Can be upgraded to maximum of 12 channels
    • Up to two extension modules MIX or MIX2 can be connected to one base module
    • Device and KNX bus module can be swapped independently of each other
    • Removable KNX bus module enables devices to be changed without reprogramming
    • Manual set-up and use of switching actuators is possible without KNX bus module
    • LED switching status display for each channel
    • Manual operation on device (even without bus connection)
    • Adjustable characteristics: e.g. switching, delayed switching, pulse function
    • Links, type of contact (NC contact/NO contact) and participation in central commands such as continuous On, continuous Off, central switching and save/call up scene
    • Switching functions: On/Off, pulse, On/Off delay, staircase light with warning
    • Logical links: e.g. lock, AND, release, OR
SKU: 4930210 Categories: , Brand:


Technical data

Operating voltage KNX Bus voltage, ≤4 mA
Operating voltage 110 V AC – 240 V AC, 50 Hz – 60 Hz
Frequency 50 – 60 Hz
Stand-by consumption ~1.3 W
Capacity loss max. 2.4 W
Installation type DIN rail
Width 4 modules
Type of connection KNX bus terminal
Max. cable cross section Solid wire: 0.5 mm² (Ø 0.8) to 6 mm² | Stranded wire with end sleeve: 0.5 mm² to 4 mm²
Number of channels 4
Type of contact NO contact, 16 A, 10 A
Opening width < 3 mm
Resistive load 3680 W
Capacitive load 200 µF
Incandescent/halogen lamp load 2600 W
Fluorescent lamp load (conventional) parallel-corrected 2000 W (200 µF)
Fluorescent lamp load (electronic ballast) 1650 W
Energy saving lamps 410 W
LED lamp < 2 W 75 W
LED lamp 2-8 W 850 W
LED lamp > 8 W 850 W
Inrush current max. 1500 A / 200 µs
Voltage output 240 V AC
Switching output Potential-free
Switching of various phases Possible
Suitable for SELV Yes if all channels switch at SELV
Accuracy current measurement I > 1 A: ± 8 % of measured value; I < 1 A: ± 100 mA; lowest measurable value: 150 mA
C load
Type Base module
Ambient temperature -5°C … 45°C
Type of protection IP 20
Protection class II according to EN 60 669


Tender text DOC RMG-4-I-KNX_4930210 (25,1 kB)
Hand book ZIP KNX_HB_RMG_4_I_MIX2 (2,0 MB)
Operating instructions PDF RMG 4 I (2,0 MB)
KNX-Database (Single Product) ZIP KNX_DB_MIX2 (536,5 kB)
CAD symbol ZIP CAD_RMG4IKNX (117,5 kB)
Data sheet PDF RMG 4 I KNX (369,2 kB)
Brochure PDF KNX home and building control brochure (5,9 MB)
Catalogue PDF General catalogue 2022 (35,1 MB)

Shopping Cart

Save Cancel

Estimate Shipping

Calculate Shipping